eastwood 2k clear vs spraymax eastwood 2k clear vs spraymax

SprayMax 3680061 2K Glamour High Gloss Clear Coat (384) $132.00 SprayMax 3680061, 2K Urethane Glamour Clear Coat, Aerosol FREE SHIPPING $45.00 Free shipping SprayMax 2K Clear Glamour, 11.8 oz #7201-190 (8) $29.95 $16.90 shipping 3 watching Designed to last through the toughest environment, such as high-temperature automotive applications, this is a high-gloss, moisture-cured urethane coat. Yes, you can. After curing, the resulting film is resistant to moisture, chemical, and abrasion. Spray Max2 part Aerosol Clear Coathas excellent adhesion to basecoatandcured lacquer and enamel finishes. Only ever lightly sand the area, we never want to affect the base color. Thanks guys. They help cover up dents, chips, and scratches and require more polishing to get a glossy finish. Left the car and went to sleep woke up to snow. Suffice to say I have painted a lot of things with Grimmspeed's WRB paint. USC Spray Max 2K High-Gloss Clearcoat Aerosol, 4-Pack: 2 component aerosol clearcoat; Easy to apply; Flows smooth and dries to a long-lasting, high-gloss finish . And although the surface is very hard, you can sand it with a sanding machine to create a very smooth surface that's easy to paint. . Amazon has encountered an error. I have used the spraymax 2k many times. It is also resistant to salt spray and dries and very quickly after application. I was really impressed with the huge improvement they had achieved with their spray tips, a nice wide and fine pattern and in the case of the matt black it covered 3 times faster then the aerosol made by Marhyde that I had in my cabinet. removing spray wax spots on clear coat finish, If this is your first visit, be sure to Additional coats can be applied at any time, Tends to run when applied on vertical surfaces. Perth By . its a great product but very expensive, better off buying a sprayer of you plan on doing it again & again.even if its one of those all in one sprayers like the gray HF one You must log in or register to reply here. I was able to do the headlights on three vehicles. If you use it the next day it spits pieces of clear coat towards the end of the can. Sticks by chemical action where their 2K Aerospray mixes an Isocyanate with the clear and sticks by mechanical adhesion. Epoxy primer works best on bare metal and is recommended for newly-fabricated metal parts or those that have been fully stripped. Spraymax is even better than that. Some clear coats are formulated with UV-resistant compounds to prevent UV rays from discoloring your car. Joined Aug 5, 2011 Posts 498 Location NW Georgia. Not really looking to debate what can be achieved or anythingI have just never done Duplicolor under a 2k and wanted to button down the timing. This 2k urethane Clear Coat spray has a much higher U.V. If you havent pinned it down to a manufacturing defect or a product from a low-quality brand, then you may have taken too long between applying the base coat and topcoat. MS-100 2K Clear TDS. This company was established by a team of experts who researched the refinish market to determine the best and quickest techniques for mobile refinish repair. JavaScript is disabled. This 2k urethane Clear Coat spray has a much higher U.V. If you got the Spraymax 2K, you only need to let it flash for about 10-15 mins in between coats. 3-year shelf life. Ive worked with a lot of different clear coats but 2K in a rattle can?! No two automotive clear coat products are the same. Looks better than the factory paint on the fenders. I just sprayed 3 coats of spray max 2k clear glamour on the scratch repair, it looks really clear, do I really have to wet sand this or can I just go straight to polishing. I painted a tank with Duplicolor, but wanted a more durable coating than the Duplicolor can provide. You can get a finish comparably smooth to most factory paint jobs, but don't expect a show quality finish. Only time will tell how durable it actually is, but it's held up well for the last few weeks. Thanks guys. We develop new solutions and create impact at scale. The aerosol spray allows you to work with a lot of precision without using a paint gun. Glamour coats are also more resistant to moisture. I had the same problem I had with the Eastwood Ceramic Gloss Red. New summer job opportunity has popped up! It has a wider spray pattern than traditional aerosols. i used the same spraymax in a can. I was thinking the 1k acrylic enamel could provide a thicker layer of protection than the 2k polyethylene. I followed the directions on the can and also used tape to hold the button pressed in while spraying. As expected of most Rust-Oleum products, it goes further to stop and prevent rust from forming and its weather and fade resistant. Microsheet silicate technology allows it to build a powerful water barrier that resists moisture and water penetration. Spendy stuff, but much better than acrylic. . It must be easy to apply, cure well, and leave a smooth finish. 3M Plastic Sheeting With 388N Yellow Masking Tape (36 mm), 06724, Tear Resistant, Easy To Cut, Durable, 16 ft x 400 ft, 3M P95 Respirator, Half Face, Disposable, 53P71, Large Size, Protection Against Organic Vapors and Particulates, Surgical Blue Tack Rags - 12 Pack (Made in USA), LiME LiNE Clear Automotive Basecoat Paint, Quart, Intercoat Binder, Carrier for Transparent Candy Paint Metallics and Pearls, Carfidant Ceramic Coating Spray - Premium Paint Polishing Spray - Hydrophobic Paint Sealant Polish Spray, Spray Can Paint Shaker Mixer - Drill Powered Paint Shaker Electric Paint Shaker Miniature Spray Paint Shaker Paint Can Shaker Electric Spray Paint Can Mixer Rattle Can Shaker Electric Paint Shaker, The Army Painter Color Primer Spray Paint, Matt White, 400ml, 13.5oz - Acrylic Spray Undercoat for Miniature Painting- Spray Primer for Plastic Miniatures, POR-15 Rust Preventive Coating- Semi-Gloss Black - 1 Gl - Stop Rust & Corrosion Permanently, Anti-Rust Non-Porous Protective Barrier, 1996-2023, Amazon.com, Inc. or its affiliates, Eastwood 2k Aerosol Spray | Clear Coat Automotive Paint Aerosol Spray with Long-lasting and Durable Finish 12 Oz Can | Clear Coat. Our 2K spray can consists of two components: clear coat and hardener. Therefore being a true 2K, there is a pot life. Spray max 2K Clear Coat Semi Matte (19) $30.53 Free shipping Only 1 left! You can get a finish comparably smooth to most factory paint jobs, but don't expect a show quality finish. We also love that it provides excellent adhesion to a variety of materials. SE1 9RS My wheels look brand new and the clear laid out smooth as glass and was easy to spray. Wynyard Quarter I applied 3 coats of this 2k Eastwood clear (7) and they turned out looking good. Formulated with Eastwood proprietary technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. Whether you want to prime metal surfaces or prepare your car for a paint job, this primer is an excellent choice. Just wanted to throw out my 2 pennies. Cause I see Eastwood now has a house brand 2K rattlecan. Full content visible, double tap to read brief content. A two-part epoxy primer is a structural steel primer. Please check compatibility before purchasing. So what's the difference between these two Eastwood's 2K clear coats? eastwood 2k clear vs spraymaxskims metallic swim campaign eastwood 2k clear vs spraymax. !, great headlight restoring paint, but mask well, Reviewed in the United States on August 25, 2019. Not sure never used spraymax before. But after you read this buying guide, it should be easier for you to find the best epoxy primer for your needs. The initial formula contained whale oil but many changes have been made throughout the years to make the product better. 2K paint gives a harder finish, which is resistant to solvents, much more so than 1K paint (kinda useful on a gas tank). Suffice to say I have painted a lot of things with Grimmspeed's WRB paint. We stand behind our solutions and customers. hey guys would one spray bottle be enough for 3 coats on a sedan rooftop with a sunroof!!? It looks just like Eastwood's 2K paint which splattered so bad for me I ruined my sneakers and made a mess of the fender I was painting. Ideal application conditions: Temperature between 70-85 degrees Fahrenheit at 50% humidity or less. You will have bad adhesion between the duplicolor and spraymax coats. Now my first choice for something like my snorkel scoop would be to spray it with my guns in the booth with a catalyzed base clear matt since its more durable but that's easy for me, if I needed to do this in my garage I would use the can of Spraymax Matt black that I have out there on the self for sure. Drying: Full cure in 12 hours at 68 degrees Fahrenheit, 35-40 minutes at 140 degrees Fahrenheit (IR drying). duplicolor and spraymax 2k real advice????? You may also not be too pleased with the thick layer it creates. Please try again later. This highly versatile epoxy primer is suitable for a variety of priming needs. I just painted and cleared my wheels i refinished and used the spraymax vs. setting up my hvlp gun and 2 cans did all four wheels fronts and insides. AeroSpray 2K clear coat can be a topcoat on pretty much any lacquer or single-stage urethane Eastwood paint. A gallon is enough to cover up to 150 square feet. MS-100 2K Clear. Check out our selection of touch up paint products and get fantastic value when purchasing your 2K clear coat paint. Formulated with Eastwood proprietary technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. you need to use it all with in a day or two ,light coat first then keep building it up . For a better experience, please enable JavaScript in your browser before proceeding. http://www.repaintsupply.com/spraym-hot-rod-satin-black-paint-aerosol-p5205.html. Continue with Recommended Cookies. You can also apply primer surfacer or filler over epoxy primer to get rid of any minor imperfections and to create a flat surface before you paint. For less than $50, you can find clear coats of varying quality, typically sold in 12- to 15-ounce spray cans. The great thing about this epoxy primer is that it can be used as a sealer for basecoat clear coat. We are sorry. AU73990000001. I have a vw jetta and I did not plan to use primer as my mission was to fix. it is high quality 2k clear coat like you find in a today we are going to go over the car rep 2k aerosol clearcoat. We always aim to offer genuine, accurate guides to help you find the best picks. Eastwood tech says that their Duraspray is not a 2K, but has 2K properties. Re: duplicolor and spraymax 2k real advice????? Purchase direct from them here: https://www.eastwood.com/e.. Its heavy viscosity allows it to fill imperfections on surfaces for a more uniform look. Approx. Eastwood 2K High-Gloss Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Eastwood seems to do that a lot with their paint products. SprayMax now offers a 2 part (2K) Urethane Aerosol Clear Coat. Is that correct? Our reviews are driven by a combination of hands-on testing, expert input, wisdom of the crowd assessments from actual buyers, and our own expertise. The Drive has answers. It's a DTM (Direct to Metal) Primer. Posted on . High-Gloss Clear, Spray Max 2k High Gloss Clearcoat aerosol, Sales & Promotions - For forum members and non-forum members, Tips, Techniques and How-to Articles for Interacting on Discussion Forums, Detailing Classes - Sign-up Threads & Picture Threads, 3-Day CAR Detailing Bootcamp Classes - Info & Dates, PICTURES: 3-Day CAR Detailing Bootcamp Classes, 2-Day BOAT Detailing Classes - Info & Dates, Wednesday Night Detailing Classes - Info & Dates, PICTURES: Wednesday Night Detailing Classes, 2-Day ROADSHOW Car Detailing Classes - Info & Dates, PICTURES: 2-Day ROADSHOW Car Detailing Classes, Griots Garage Polishers - BOSS - 6" DA - 3" DA, Porter Cable 7424XP Dual Action Orbital Polisher, Car Detailing History - Vintage and antique car waxes and buffing tools, Review: Wolf's WF-1NT Clear & Coat and Poorboy's Spray and Rinse (Pic Heavy). To make sure youre picking out a clear coat that suits both your needs and your preferences, heres what to look for. Before activating, shake aerosol vigorously for 2 min. Please make sure that you are posting in the form of a question. It goes without saying that this is the first feature you should look for. you can achieve GLASS if you put enough clear on and have good hands and common sense. CB650C,CB550F,GL1000,CB750A. Overall this seems like the best finisher for restoring oxidized headlights. Featuring a two-in-one design, this is both a touchup marker and brush so you can fill and even out minor chips or scratches on the clear coat. It looks really clear. Two Component Technology in a Can for the Best Appearance and Durability. the reason to let it . Please make sure that you are posting in the form of a question. The clear activator may contain tiny pieces that don't dissolve. For $50 to $100, youll find aerosol cans in packs, along with one-gallon cans of clear coat that can cover both repairs and a full fresh coat. Wear protective gloves and masks to reduce your exposure to toxic fumes. We and our partners use cookies to Store and/or access information on a device. I use an old wooden wardrobe app 5 ft long 3 ft wide and 6 ft high. 1971 CB750K1 (newest bike), 1996 Royal Enfield 500 Bullet (therapy bike), 1981 Yamaha XV920RH, 2006 Kawasaki Concours (retirement bike), 1975 Yamaha RD350 (race bike), 1989 Honda VTR250 Interceptor (race bike), 1986 Kawasaki EX250 Ninja (race bike in progress), 1985 Honda Elite CH250, 1973 Yamaha GT1 80cc, 1974 Yamaha DT360 project bike. Most Durable Paint in an Aerosol Available, Max Temperature: Paint will handle up to 250-300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting. In the past I have used the Grimmspeed clearcoat as well as Spraymax 2K Glamour High Gloss, both with decent results. Works great compared to other rattle-can clear coats such as Rust-Oleum, Duplicolor, or VHT Engine Enamel. There's no use buying an epoxy primer that does not work. You can use it on any surface, including bare metal or your headlights. After TotalBoat was launched, it started developing marine repair and maintenance products. It dries quickly and offers protection against rust, corrosion, and deterioration. They also have a system that the where the bodyshop supply can load some base coat that they mix for your need into an aerosol and your do your spot in then use their catalyzed aerosol clear to top coat it with and their blending solvent to make the leading edge of the clear to disappear and it turned out far nicer then I would have believed. Ferguson had noticed that fish oil that had spilled on rusted metal decks prevented corrosion from spreading. I have used both of these products independently. ! These coats are easy to polish, have great depth, and provide a glossy appearance. Yes please! Spray Max can be used on motor vehicles, wheel rim inserts, bicycles, agricultural and construction machinery, woodwork, guitars, and much more. Appearance was a consideration to ensure that as you fix flaws, your newly applied clear coat can blend right in for a seamless look. There was a problem adding this item to Cart. 2K clear coat spray cans providers a far superior level of protection. Eastwood 2K Aerosol - YouTube Inside the luthier's shop with BigDGuitars.com. Benefits 2K over 1K spray paint Scratch resistant Petrol resistant Chemical resistant UV resistant Does not yellow Ive NEVER took the time to write a review for any product and Im 50! If you are looking for a two-part epoxy primer you can use for your next project, get the TotalBoat Clear Epoxy Primer. AU72290000001. The major difference is that a 2K gloss clear coat needs either a catalyst, an activator, or a harder. Generally speaking, most 2K options come in the form of a polyurethane clear coat as it is much more robust. I don't think you'd ne. However, it is much thinner than most epoxy primers and you may have difficulty applying it with a brush or a roller. Additionally, the clear activator has tiny pieces that may not dissolve at times. We would have to advise you to test a small area before applying over everything. This means you will be done with your project in no time. If you want to do a full-body paint, you could go for a one-gallon paint can and purchase a spray gun for the application. Thats partly thanks to its sleek, glossy clear coat. I would NOT paint this immediately over Duplicolor lacquer based paint. If you need a bare metal clear then our Diamond Clear or our ExoArmour would be best. Pros: - The instructions are mostly easy to follow. Once the 2K Spray Max aerosol can is activated with the hardener, use within 12 hours. I too have used the Spraymax version once. The zinc phosphate is added because of its corrosion-inhibiting properties. For about $70 total, I repaired and painted the scratch as well as the lower portion of my front bumper, that had Just finished touching up some small scratches on my car with this 2K clearcoat. This product makes your job easier because it functions as a primer and a sealer. 101 Pakenham Street West Thats why its a smart idea to stock your garage with a quality clear coat that you can apply as often as needed, enhancing the protection and the appearance of your car no matter its age. Aim to paint on a day that is around 72f as it means the clear coat will dry evenly. OEM Select Basecoat Paints Mixed by Code or Make-Model-Year, Rust Treatment & Removal Products & Solutions + How To Tech, Abrasive Blasting - Pressure and Syphon Blasters, Mechanically Remove - Grinders-Sanders-SCT, Mechanically Remove - Sanding and Grinding Discs, Wheels, Bands, 2K AeroSpray and DuraSpray Paints Primers Clears, Hi Temp Engine, Exhaust, Turbo Paints and Coatings, Arc & Oxy-Acetylene Welding & Cutting Accessories, Powder Coating Upgrades + Consumables and Accessories, Metal Machining Tools - Mills, Lathes, Accessories, Pedestals - Stands - Quick Change Receivers and Mounts, Chevy/GM Long Block, Short Block, Base Engines, Ford Long Block, Short Block, Base Engines, Components - Brackets - Plates - Hardware, Chevy/GM Header-Back and Cat-Back Exhaust Systems, Chevy/GM Tail Pipes - Side Pipes - Crossover Pipes, Modeling Kits for Exhaust, Headers, Turbos, Chevelle - Malibu - El Camino Wiring Harnesses, Decal - Pinstripe Removal & Surface Conditioning, Blast Cabinet Accessories and Replacement Parts, Replacement Parts, Consumables & Accessories, Headlights - Taillights - Accessories - More, Eastwood's 2K AeroSpray High-Gloss & Matte Clear. Eastwood's 2K AeroSpray? Ive worked with a lot of different clear coats but 2K in a rattle can?! Most Durable Quality Spraypaint Clearcoat - Eastwood Diamond Clear vs Spraymax 1K. It is an incredible adhesive that does not need to be spread using a squeegee. Choose one that withstands extreme impact, is resistant to automotive chemicals, and adheres well to most truck surfaces. a few mins between coats took a while to dry maybe 18 hours or so . I couldn't believe it. You must log in or register to reply here. I would for sure buy this paint again. It looks to me as if Eastwood's has struck a deal with whoever holds the spraymax patent. This is a two-component primer which contains a sealer and zinc phosphate. While this is one of the best primers on the market, it has a few downsides. howevea you can get AMAZING results from a can do a search on here ,,, are you fuking kidding me?????????? please watch: "how to paint plastic car parts to enhance performance" watch?v=za jywjmyw0 this paint might be a game changer for diy painters and spray can users. Runway East There are no members to list at the moment. Practice general safety every time you use epoxy primers as some are made of harsh chemicals. Higher solid coats are also the most expensive. check out the. But to get a usable product, you have to mix the epoxy primer with the hardener. The mixture is easy to apply and once it cures can be easily sanded. Its two components cure chemically by cross-linking. For the best results, use a paint roller to apply it. From the kinds of protection offered to the level of gloss and shine created, each has its own pros and cons. 1.2-mil per spray pass. I purchased this to repaint the motor mounts on my 4th gen Camaro build to go along with my beautiful powdercoated tubular K-member and associated suspension parts. We particularly love the Rust-Oleum 247597 VK9300 Epoxy Spray Primer. Use urethane-based clear coats as they are more adhesive to plastic. i did mine out side on a nice warm day . I sprayed it out side in indirect sunlight with 85% humidity. Practice applying the clear coat on card or paper before, so you get a feel for the flow rate and how the clear coat spray handles. Spray-on formulas are usually quicker to dry. The primer is specially designed to be used directly on metal. In that case, your base coat may be too dry and may not stick correctly to the topcoat. It's all goodI know what I can get out of a can. TDPRI, short for Telecaster Discussion Page Reissue, is the leading online community and marketplace for Telecaster guitars. I did this process to another car, whose headlights I had refinished a little over a year ago with the store-bought spray paint mentioned above (6). And if you live in an area with a lot of humidity, make sure the product has the ability to block moisture. With great adhesion and anti-corrosion properties, the SprayMax black epoxy primer offers strong and long-lasting protection for bare metals. And since the spray pattern is very wide, the film may be quite thin. Go for fast-drying types like turbo and topcoat clear coats if you would like to buff the coat an hour after applying it. However, if you are looking for something that can work in different environments, the budget-friendly SprayMax 2K Activated EPOXY Primer is a must-have. Very easy to use. It is designed using Eastwood's patented technology and provides a long-lasting finish, keeping your material beautiful for years to come. It is a corrosion-resistant primer that is free of lead and chromate. However, you can sand out any dirt or debris before applying another layer to achieve a cleaner coat. Use of this site indicates your consent to the Terms of Use. Youve got questions. I look at him like a Hemorrhoid, Some say he grows on you but most folks just want to cut it-him off, You can use substances for temporary relief, but in the end removal is the real deal, or at least other forums came to that conclusion). We stand behind our solutions and customers. And if that is the case do i give the tank a sand before i spraymax? End product looks awesome! spigen armor case iphone 12. eastwood 2k clear vs spraymax. For bare metal use a primer !!! AeroSpray 2K clear coat can be a topcoat on pretty much any lacquer or single-stage urethane Eastwood paint. A: London JavaScript seems to be disabled in your browser. While we love this epoxy primer, we feel In the Swim should make the container more tough because it gets easily dented. I could be mistaken, but I believe the Eastwood is just the SprayMax with Eastwood's name on the label. If you want to prime a large surface, it is important to get a primer that can do the job excellently in the shortest time possible. I've repainted several bikes, but have been disappointed with the durability of rattle can paint. We use google analytics to gather anonymous information on web traffic. Left the car and went to sleep woke up to snow. AU74390000003. The company makes a host of products, from epoxy primer to varnish. So don't wait a week but just spray the spraymax over the duplicolor 10mins after my 2nd coat? MS-22 2K Clear. (He annoys the shit outta me as well. They are usually to blame for the new paint smell. lacquer buffs real easy. Seems like it's the best aerosol option for a hard, non-yellowing, glass-like finish, but I guess bad batches occur. Vehicle: 2002 TOPSCOOB031. Eastwood 2K High-Gloss Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! I just merged your two threads since they had the same title. A lot of guys like Rustoleum satin black or wrought iron black. The pot life is approximately 48 hours after the can is activated. I followed the directions on the can and also used tape to hold the button pressed in while spraying. Just finished touching up some small scratches on my car with this 2K clearcoat. We encountered an error while updating this page. 2K Matt Clear TDS. It may not display this or other websites correctly. If you use it the next day it spits pieces of clear coat towards the end of the can. After it cures, it is easy to sand and leaves a smooth featheredge (an edge that thins out like a feather). My question is, what is the standard timing of this process? When trying to correct any uneven areas or iron out the smoothness, work slowly. Support the site. Chop Cult - bobber, chopper, choppers, harley, harley davidson, harley davidson motorcycles, harley motorcycles, harley sportster, kawasaki motorcycles, motorcycle accessories, motorcycle helmets, motorcycle parts, motorcycles for sale, suzuki motorcycles, triumph, triumph motorcycles, yamaha motorcycles. The easiest coats to apply come in spray cans. Decals were not water transfers, but I did wet the frame to allow me to move them arround when appling. Clear coats are non-pigmented paints, but some change the color of the base paint by darkening it. The appearance after the job is like brand new ones. The cans pressure is also not very high. It is also vital to check if the product is meant to be spray- or brush-painted. Q: All Rights Reserved. Protect new paint jobs with a coat of 2K AeroSpray clear from Eastwood. "Innovation Unit", Use a hyphen before a word to exclude pages with this word, e.g. However, for the best results, you cant use this primer on its own. 2022Recurrent Ventures. The primer has a pot life of four hours in a setting with a temperature of 85 degrees Fahrenheit. 1971 CB750K1 (newest bike), 1996 Royal Enfield 500 Bullet (therapy bike), 1981 Yamaha XV920RH, 2006 Kawasaki Concours (retirement bike), 1975 Yamaha RD350 (race bike), 1989 Honda VTR250 Interceptor (race bike), 1986 Kawasaki EX250 Ninja (race bike in progress), 1985 Honda Elite CH250, 1973 Yamaha GT1 80cc, 1974 Yamaha DT360 project bike. If youre looking for 2K clear coat near you, check out the growing network of Eastwood retail stores. Eastwood Durable Paint 2K Aerosol High Gloss Clear Spray 12 Oz 4.7 (444) $11563 ($16.29/100 ml) FREE delivery Mar 6 - 14 Only 6 left in stock. The Rat Rod Satin black we sill is a SSU paint so the clear coat is already mixed in. This marker is fitted with a non-clogging tip, so the formula goes on easily, and it cures into a glossy finish. Rust-Oleum Auto Body Clear - $33.02 This ready-to-spray. Add to Cart Save for Later 90 day Warranty Included 100% Satisfaction Guarantee Since 1978 Allow 5-10 minutes between coats. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support. The other one, Duraspray, has no pot life.